Septic tank planning calculation
Estimated household flow = household members × gallons per person per day. The two-day volume illustration is an arithmetic scenario, not a design flow, permit rule, or tank recommendation. State and local authorities set capacity requirements; there is no universal 50-state bedroom table. The Minnesota reference applies only to Minnesota Rule 7080.1930.
Pumping interval and date
The pumping frequency tool looks up a suggested interval using tank capacity and household occupants, then adds it to the verified last pumping date. It uses historical table values as a planning estimate, applies a disclosed 0.7 disposal heuristic, and caps the reminder at five years. EPA commonly recommends professional inspections every 1–3 years and pumping every 3–5 years; measurements, local requirements and the service provider take priority.
Pumping cost estimate and quote totalizer
Mode 1 presents broad US planning ranges informed by published consumer cost data and illustrative access, hose and timing adjustments. It is not a local quote or a validated regional model. Mode 2 computes Total = Subtotal × (1 + Tax Rate / 100), where Subtotal = Base Pumping + Access/Digging + Other Fees + Emergency Surcharge.
Tank volume and drain-field planning
Rectangular gross volume = internal length × width × liquid depth × 7.48052. Cylindrical gross volume = π × radius² × liquid depth × 7.48052. Drain-field absorption area = daily design flow ÷ approved soil loading rate; trench length = absorption area ÷ trench width. The drain-field tool does not infer a loading rate from percolation time because codes and site conditions vary.
Symptom troubleshooting logic
The troubleshooter evaluates reported symptoms against risk factors: indoor sewage backups, suspected outdoor surfacing, and saturated wet yards automatically trigger an Urgent recommendation. Active pump alarms prompt prompt equipment service. Persistent slow drains or odors prompt a professional inspection.